Occupational Safety & Health Administration
Hand And Power Tool Safety
Other Resources
|
Freud TK303 Avanti 7-1 4-Inch 40 Tooth ATB Thin Kerf Finishing Saw Blade with 5 8-Inch and Diamond...
|
Tools & Hardware > Saw Blades > Item 51
 |
Freud TK303 Avanti 7-1 4-Inch 40 Tooth ATB Thin Kerf Finishing Saw Blade with 5 8-Inch and Diamond...
|
by Freud
Sales Rank: 13823
|
List Price: $25.50
$19.98
At Amazon
on 11-29-2008.
|
|
Features
Excellent for framing
Expansion slots cut vibration
Anti-kickback
Thin kerf, flat tooth, long life
7-1/4-inch, 40-tooth, 5/8-inch & diamond arbor
Manufacturer Description
This blade features expansion slots that are strategically placed to allow for blade-body expansion from centrifugal force and thermal expansion during actual use. Slots are used to prevent air turbulence and nearly eliminate vibration. Anti-kickback design takes the frustration out of many operations. Thin-kerf blade requires less energy to feed the material into the saw blade and eases the strain on your power tool. 7-1/4-inch, 40-tooth TK, 5/8-inch with optional diamond arbor (pop out center-piece with screwdriver for diamond arbor).
Product Description
The advanced thin kerf design, using a specially designed hardened blade, runs truer under load than many other saw blades running freely. Combined with razor sharp carbide teeth, this blade cuts plywood and chipboard practically splinter-free as well as crosscutting and ripping hardwood and softwood. The PermaShield coating on the TKR300 blades makes them resistant to friction and heat build-up. Coated blades last up to 50% longer than conventional blades before needing sharpening. Application: General Purpose For Cutting Natural & manmade Materials
Owner Reviews, Ratings, Comments and Criticism
When I put this blade on my old skil saw, I thought for sure someone had switched saws on me. If your skil saw is giving you any difficulty at all, try switching to this blade and see how it should be done! I've been cutting some 1/4" oak finish beaded paneling and I don't even have to turn it face down. My old saw blade would have chipped and torn out much of the oak finish if I tried to saw it face up. Not this blade. I rubbed the bottom of the saw with wax paper and away I went. Not a mark to be seen. Great blade!
|
Freud TK303 Avanti 7-1 4-Inch 40 Tooth ATB Thin Kerf Finishing Saw Blade with 5 8-Inch and Diamond...
Available from Amazon
Price: $19.98
Updated on 11-29-2008.
|
|
|
